Square Meters to Square Feet Converter (m² to ft²)
Convert square meters and square feet using the international foot definition.
How it works
Square meters × 10.763910416709722 = square feet. Square feet ÷ that factor = square meters.
Formula / calculation method
square feet = square meters × 10.763910416709722square meters = square feet ÷ 10.763910416709722
Worked examples
- 1 m² is approximately 10.76391042 ft².
- 100 m² is approximately 1,076.39104167 ft².
When this tool helps
Useful for property listings, floor plans, construction, renovation, room areas, land comparisons, architecture, and international real-estate measurements.
Related calculations: acres to hectares and meters to feet.
Browse this topic: Speed, Temperature & Area Converters · Speed, Temperature & Area Guide.
Quick reference
| Input | Result |
|---|---|
| 1 m² | 10.76391 ft² |
| 10 m² | 107.63910 ft² |
| 100 ft² | 9.29030 m² |
Accuracy and definitions
The factor is derived from the international foot, exactly 0.3048 meters. Because area is two-dimensional, the linear conversion factor is squared.
Reference standards
Where a published measurement definition applies, Solveberry links to primary standards rather than relying only on secondary converter sites.
- NIST Guide to the SI — Appendix B.8 conversion factors
- BIPM SI Brochure — International System of Units
Methodology & verification
- Method
- Square meters × 10.763910416709722 = square feet. Square feet ÷ that factor = square meters.
- Verification
- The displayed formula is cross-checked against Solveberry regression cases before release. Calculator inputs and results stay in the browser.
- Last reviewed
- 2026-08-19
Results are calculated locally in your browser. Optional analytics do not include calculator input values or results.
Common questions
Why isn't the area factor 3.28084?
3.28084 converts a length in meters to feet. Area requires squaring that linear factor, giving about 10.76391 square feet per square meter.
Is this suitable for property area?
Yes for unit conversion. Legal or surveyed property areas should still be verified against official documents.
Can I convert in the opposite direction on this page?
Yes. Use the “Convert from” selector or Swap units button; Solveberry keeps both directions on one canonical page.
Why can my result differ slightly from another converter?
Differences usually come from rounding or from selecting a different regional measurement standard. Solveberry shows the factor or standard used on the page.